Welding Hose Overview

• All units in the machine should be equipped with back-flow prevention and flash back arrestors.
  


• Welding Hose should be check before you use.


• Oxygen and acetylene hose shall be fastened together with approved clamps at
  period of three to four feet along the hose.


• Take Care of hose from being damaged.


• Welding Hose shall be fastened to the regulators and torches by approved fittings only. It is important that all connections be kept tight.


• Use Welding hose and connections made especially for gas welding and cutting.
  
  
  
  • Red colored welding hose can be used for acetylene or other fuel gas
  
  
  • Green colored hose for oxygen.


• Care shall be taken that the hose does not become kinked or tangled. Place the hose
  so that it will not be trampled on, run over or present a tripping hazard.


• Examine welding hoses for defects before use. Defective hose shall not be used.