Tips for TIG Welding:

Anybody who has worked by TIG Welders and automatic and orbital TIG systems, knows the TIG weld quality is highly needy on retain the shape and excellence of the tungsten tip. Weld begin data is dangerous with automatic TIG welding applications. Tungsten life is better with a begin ramp up from a low current begin point then ramp to the operating power.
The PowerTig 315DX power source is shown above. This is one of the most excellent, cheap, Adjustable weld parameters for 2t/4t operation. Connect to clean power generator for "go anywhere" capabilities. Easy to connect torch and accessories allow quick setup. The equipment delivers reliable, controlled weld results and the company that provides the gear provides brilliant gear product support.

For automatic TIG welds with AVC controls or high-quality tungsten to work height control, with the use of right tungsten dimension and weld parameters, both a tungsten point and a tungsten with a little flat spot with a 20 to 30 degree angle be supposed to be able to obtain the tungsten through at least a high duty 6 to 8 hours of arc on time with no tungsten regrind or modify.