Plasma Cutter Thickness Ranges:

Plasma Cutting machines that can use both manual and mechanized tasks generally have a lower thickness rating for mechanized cutting rather than manual. This is for some reasons.

Initial and end the cut on resources close to the maximum thickness correctly needs some operator method that is simple for a human operator but hard or not possible to program into a machine. Hence a lower rating for acceptable cuts.

Mechanized plasma cutting needs sharp in many cases rather than edge starts. A machine usually cannot pierce successfully as thick as it can cut.

Customers using plasma cutting equipment in an automated set up would normally find the cut speeds on the thickest resources too slow to be satisfactory for mechanized process.