Welding Techniques

• Hold torch approximately 75-80 degrees from horizontal and the filler rod 15-20 degrees from horizontal.
  
  
• Hold the tip of the electrode about 1/8” away from piece and press the pedal down until an arc is created between the electrode and work piece.
  
  
• Keep peddle depressed until puddle is created.
  
  
• Ensure the tip of the electrode does not touch the molten weld puddle. This cause electrodes to become contaminated with weld material.
  
  
• After puddle is created use a circular motion or repeated crescent motion to move puddle while adding filler rod.
  
  
• When welding thinner materials a heat sink, consisting of a metal block, can be used to dissipate excess heat. Place this heat sink underneath material when welding.